Be the first to review this product
Write Your Own Review
Specifications:
- 82mm stroke
- 1-5/8" journal (use with any replacement OEM Triumph 650/750 twin rod shells (B2026M)
- Long snout for better alternator rotor support
- Approximately 18.5 pounds
- Dynamically balance with a pair of 713gram bob weights creating roughly a 75-77% balance factor dependent of remaining components
Features:
- EN40B Billet Material - EN40B steel
- Rated 123,000-144,000 psi
- The Best alloy used for cranks in a British twin
- "Tear-drop" journal oil holes for better big-end oiling
- Heat treated
- "Ion Nitrite" treatment for longest life (similar to British Tuftriding)
- Ionized nitrogen is vacuum deposited onto the crank surface in an oven, penetrating .010 to .012 inch into the metal surface and changing the microstructure of the steel, surface hardness is doubled from 30 to 60 on the Rockwell scale, while fatigue life is increased by 25 percent.
- Shot peened to reduce internal stresses
- Generous Crank "Fillets" for strength and rigidity
- Out-bounded Counterweight to lessen the possibility of crank flex
Note:
- Highly Recommend the use of MAP7061 (4340 ultra light steel rods)
- The T140 crankshaft can be used on pre-1971 models, but it requires the use of a "conversion" timing side main bearing (70-3835/MI (ball bearing) or 60-7362/MI (latest factory located roller) or the crank journal can easily be turned to fit imperial unit (inch) bearings.
- Use with a standard electronic ignition, and camshafts (stocked at M.A.P. Cycle)
About crankshaft bob weight:
- Bob weight is the amount of weight added to each journal before it is spun also known as dynamically balanced. It is calculated in the following manner:
Bob weight = (complete piston assembly + small-end rod weight) X (balance factor) + (big-end rod weight + bearing shells)
" />