This kit is designed specifically to work with our belt drive kit. It includes everything you need to let your crankcase breath properly, while limiting the oily mess usually associated with other breathers.
Includes:
Heavy-duty, alloy, one-way reed valve breather
Barbed fitting designed to screw into crankcase timing plug
Clear tubing
Cable Ties to clamp and secure tubes
Fits:
1970-79 Triumph 650 and 750cc Twins, including T120/T140 Bonneville, TR6 Tiger/Trophy and TR7RV Tiger
Installation Note: Install the breather so that the direction of flow is out of the crankcase. The side with the lip on the fitting is the intake (exits reed box at 90-degree angle) The fitting exiting the back of the reed box (with no lip) is the exhaust. The can be tested by blowing into the fittings. If you blow on the end, and air passes, this is the intake. If you blow on an end, and air is blocked by the reed, this is the exhaust.
Loading...
Loading...
Questions
4
No questions yet. Be the first to ask the question!
