General : 727.381.1151   Toll Free : 1.800.875.BRIT(2748)

Tools

List Grid

Set Descending Direction

1-40 of 78

Page:
  1. 1
  2. 2
  1. Triumph Trident BSA Rocket 3 Hurricane Throttle Assembly Tool 60-1865
    $12.50
    You can fight to assemble that throttle rod, or you can use this factory tool which will make the job much easier. Works on all Triumph Trident Models (T150, T160) and Hurricane as well as BSA A75 Rocket 3.

    60-1865

    English Made

    Learn More
  2. Triumph BSA Fork Column Bottom Cone Fitting Tool 60-2218
    $27.50
    This is exactly the same as the factory tool (part number 60-2218) which is no longer available. Works with Triumph T150, T120, T100 and TR25W as well as BSA R3.

    60-2218

    MAP Cycle

    Learn More
  3. Triumph T20 Camshaft Pinion Gear Extractor Tool 61-0398
    $12.95
    English made, this tool works exactly like the factory tool (part number 61-0398) which is no longer available.

    61-0398

    MAP Cycle

    Learn More
  4. Triumph BSA Steering Head Race Drift Tool 61-6121
    $24.95
    Safely and quickly removes the steering head race from most vintage (pre-1983) Triumph and BSA motorcycles. Factory-style tool, part number 61-6121.

    61-6121

    English Made

    Learn More
  5. C-Spanner Tool for Adjusting Motorcycle Shock Absorbers 62-0059
    $28.55
    Universal C-Spanner tool for adjusting shock absorbers on many models of motorcycles.

    62-0059

    MAP Cycle

    Learn More
  6. BSA Pushrod Locator Tool 67-9114
    $15.95
    This shop quality tool is used to locate pushrods in BSA motorcycles.

    67-9114

    MAP Cycle

    Learn More
  7. Piston Ring Compressors - Standard MAP-RING-COMP-STD
  8. PULLER/ CLUTCH HUB (HARRIS  Brand Only) MAP0800/A
  9. Triumph Vintage Twins Clutch Hub Puller Tool  MAP0800/HT
    $19.95
    Removes the clutch hub from all Classic Triumph twin cylinder mainshafts. Will also handle the Triumph manual magnet gear. Shop quality tool.

    MAP0800/HT

    MAP Cycle

    Learn More
  10. Triumph T150 T160 BSA A75 Triples Clutch Hub Puller Tool  MAP0801
    $24.95
    Removes the clutch hub from the mainshaft on all Triumph and BSA three cylinder motorcycles. A well-built, shop quality tool. Works the same as the factory tool (part #60-1860) which is no longer available.

    MAP0801

    MAP Cycle

    Learn More
  11. Triumph BSA Norton Crankshaft Pinion Gear Puller Tool  MAP0803
    $79.95
    Crank gear extractor for all Norton, BSA and Triumph Twins. Works off the timing gear rather than crankshaft. English made, this tool works the same as the factory tool (part # 61-6019) which is no longer available.

    MAP0803

    MAP Cycle

    Learn More
  12. Triumph BSA Norton Gear Puller Tool Replacement Jaw Set MAP0803/JAW
    $23.95
    Replacement jaw set for Triumph BSA Norton Gear Puller Tool, MAP0803.

    MAP0803/JAW

    MAP Cycle

    Learn More
  13. Norton Spark Advance (contact breaker) Puller Tool MAP0806/C
    $29.95
    A small slide hammer-style tool used by Norton to safely pull the spark advance mechanism without damage.

    MAP0806/C

    English Made

    Learn More
  14. Norton Commando Engine Sprocket Clutch Center Puller Tool MAP0807
    $26.25
    Removes both the engine sprocket and the clutch center of Norton MkI and MkII Commandos. Will also work on Dominator. Does not work on MkIII Commando electric start models.

    MAP0807

    MAP Cycle

    Learn More
  15. Triumph Tiger Cub Clutch Hub Puller Tool  MAP0809
    $17.95
    An exact replica of the original factory tool (60-0400) which is no longer available. Used to pull the clutch hub on Triumph Tiger Cubs.

    MAP0809

    MAP Cycle

    Learn More
  16. Triumph Camshaft Cam Gear Puller Replacer Installer Tool Kit MAP0810
    $62.50
    Camshaft gear tool kit. Our own redesigned, shop-quality version of the original factory tool. Includes adapters to remove and replace cam gears on all Triumph models with central external threads. Works on most pre-75 model Triumphs.

    MAP0810

    MAP Cycle

    Learn More
  17. Triumph Camshaft Cam Gear Puller Replacer Installer Tool Kit MAP0810/A
    $89.95
    This camshaft gear tool kit is a high quality product designed to work on most pre-1975 model Triumphs with central external threads. An exact replica of the factory tool (60-2213) which is no longer available. Includes adapters to remove and replace cam gears.

    MAP0810/A

    English Made

    Learn More
  18. Triumph BSA Cam Gear Puller Tool MAP0811
    $31.95
    Made in England, this high-quality tool is exactly the same as the factory tool (61-6132) which is no longer available. Removes cam gears on all late Triumph twins and triples (as well as BSA Rocket 3) with two tapped 1/4" holes.

    MAP0811

    MAP Cycle

    Learn More
  19. Triumph BSA TR25 B25 B40 B44 B50 Singles Clutch Hub Extractor Tool MAP0812
    $28.75
    Removes the clutch from mainshaft on most single cylinder Triumphs and BSAs including: TR25W, B25, B40, B44 and B50.

    MAP0812

    MAP Cycle

    Learn More
  20. Norton Pre-Commando Clutch Hub Extractor Puller Tool  MAP0813
    $31.25
    Removes the clutch from mainshaft on most Pre-Commando Nortons including Manx, Dominator, Jubilee, Navigator, Electra, Atlas, Mercury P-11A and Ranger.

    MAP0813

    MAP Cycle

    Learn More
  21. BSA External Thread 6 Spring Clutch Hub Extractor/Puller MAP0814
    $24.95
    Removes the clutch from mainshaft on most BSA models with 6-spring clutch hub and external threads.

    MAP0814

    MAP Cycle

    Learn More
  22. BSA Internal Thread 4 Spring Clutch Hub Extractor/Puller Tool MAP0814/A
    $18.95
    Removes the clutch from mainshaft on most BSA 4-Spring models with internal threads.

    MAP0814/A

    MAP Cycle

    Learn More
  23. Piston Wrist Pin Remover Tool 67mm-76mm MAP0815
    $82.95
    Universal motorcycle wrist pin removal tool. Works on just about any large bore motorcycle Helps remove those stubborn wrist pins on most large pin pistons. Works tor 67-76mm wrist pins.

    MAP0815

    MAP Cycle

    Learn More
  24. Norton Commando Rocker Spindle Puller MAP0816
    $39.75
    This tool safely and effectively allows pulling of the rocker spindles on all Norton Commando and Atlas models.

    MAP0816

    MAP Cycle

    Learn More
  25. PULLER-REPLACER/ WRIST PIN BUSH MAP0819
  26. Triumph BSA Motorcycle Intake/Exhaust Valve Blender Tool MAP0832
    $19.95
    Intake and exhaust, 1-3/4", valve seat cutter tool works with valve seat blender (MAP0834). High quality tool made to the same specifications as the factory tool (part #61-7025) which is no longer available.

    MAP0832

    MAP Cycle

    Learn More
  27. Triumph BSA Motorcycle Intake Valve Blender Tool MAP0834
    $22.95
    Valve seat blender tool works with valve seat cutter (MAP0832). High quality tool made to the same specifications as the factory tool (part #61-7028) which is no longer available.

    MAP0834

    MAP Cycle

    Learn More
  28. Harley Davidson & British Motorcycle Universal Valve Guide Installation Tool MAP0837/HD
    $69.95

    This heavy duty, beautifully engineered valve guide installation tool will work with a wide variety of heads with valve sizes of 1" to over 2". Engineered specifically for Harley Davidson motorcycles, this will work with a wide variety of motorcycles and small engines. The purpose of this tool is to pull the new guide into the head as close as possible to 90 degrees and concentric with the existing seat.

    Tool Dimensions: Large Shaft - 3/4" OD, 10" long, threaded inner shaft - approx 5/16."  Three sizes of bushings: small 1-1/2" (38.1mm), medium 1-3/4" (44.45) and large 2" (50.8mm)

    MAP0837/HD

    MAP Cycle

    Learn More
  29. Universal Motorcycle Overhead Valve Spring Compressor MAP0838
    $89.95
    This universal valve spring compressor will work on most motorcycles and small engines with overhead valves. This is a must-have tool for any motorcycle mechanic. Allows easy access to valve spring keepers.

    MAP0838

    MAP Cycle

    Learn More
  30. Triumph Top Dead Center (TDC) Piston Locator Tool MAP0840
    $19.75
    For use on Triumph twins (up to 1969). This tool is used to engage the fly wheel notch, which accurately locates the top dead center position. A must have tool for accurate timing of your Triumph.

    MAP0840

    MAP Cycle

    Learn More
  31. Triumph Top Dead Center (TDC) Piston Locator Tool MAP0841
    $14.95
    For use on Triumph twins (1969 and later). This tool is used to engage the fly wheel notch, which accurately locates the top dead center position. A must have tool for accurate timing of your Triumph.

    MAP0841

    MAP Cycle

    Learn More
  32. TDC Plunger Tool - Triumph Triples MAP0842
  33. BSA A50 A65 Ignition Timing Tool, TDC Position Locator  MAP0843
    $44.50
    Same as factory tool (part #68-0710) which is no longer available. Helps locate the exact top dead center position which is critical for timing on pre-1969 BSA A50 and A65 models.

    MAP0843

    English Made

    Learn More
  34. TDC Plunger Tool - BSA A50 A65 69-Later MAP0844
  35. Triumph BSA Norton Degree Wheel Timing Kit MAP0850
    $44.95
    MAP Cycle half-time degree wheel kit used for timing (strobing) Triumph motorcycles off of the exhaust cam. Comes with adapters for CEI and UNF threads. Mounts in place of the auto advance bolt to accurately strobe timing on most British bikes. For use with a TDC plunger, which is available separately.

    MAP0850

    MAP Cycle

    Learn More
  36. Triumph BSA Norton Universal Crankshaft Timing Degree Wheel MAP0859
    $10.95
    Easy to use, universal degree wheel for timing most 4-stroke British motorcycles off of the crankshaft.

    MAP0859

    MAP Cycle

    Learn More
  37. PROTECTOR/ CB SEAL/ LATE/ UNF (61-1810 MAP0861
  38. Triumph Motorcycle Points Seal Protector Tool MAP0862
    $8.50
    This ingenious tool protects the points seal when installing the timing cover on Triumph (1963-1983) motorcycle

    MAP0862

    MAP Cycle

    Learn More
  39. Triumph Rocker Shaft Spindle O-Ring Compessor Tool MAP0864
    $4.50
    High quality, English-made tool allows you to install rocker shaft O-rings without damage on all Triumph 650 and 750cc twins and triples. For 500 cc models use MAP0865.

    MAP0864

    L.F. Harris

    Learn More
  40. Triumph 500 Spindle O-Ring Compessor Tool MAP0865
    $6.55
    High quality, English-made tool allows you to install rocker shaft O-rings without damage on all Triumph 500cc models.

    MAP0865

    MAP Cycle

    Learn More

List Grid

Set Descending Direction

1-40 of 78

Page:
  1. 1
  2. 2