Triumph T120 Head Gasket for MAP Zero-Deck, Forged Pistons to 71.8mm Bore

Dead-Soft copper head gasket for MAP Zero-Deck pistons

Fits:

• For use with MAP T120 Zero-Deck, forged pistons up to 71.8mm bore (9.5:1 and 10.5:1 only)

Features:

• Fully annealed Dead-Soft Copper
• Made in the U.K.
• A perfect fit every time
• Gasket reusable with annealing

NOTE:

• Beware of inexpensive "Asian-import" gaskets.  These gaskets are not fully annealed and to hard to seal properly.
• Measure your piston outside diameter 90-degrees from the pin at the base of the skirt
• Please be aware that when using Any Zero-Deck piston that the headgasket must never be closer than .010" to the bore or piston will hit causing catastrophic damage!